What is the use of carbon steel stamping elbow?

Connect two pipe with the same nominal size to make the pipe turn 90 degrees.
Standard: ISO, DIN, SMS, 3 A.
Applicable temperature:-20~232℃.
Shell material: carbon steel, stainless steel, alloy steel.
Applicable medium: Gas, liquid, steam.
Product Parameters: Product process standards and quality control: feed-physical and chemical-blanking-hot forging-heat treatment-inspection-gold processing-finished product inspection-identification-finished product inspection-identification-packaging typing-shipping.
Material: Stainless steel 304 316 304L 316L 409L 202 321, carbon steel, Low-alloy, alloy steel, etc.
ANSI B16.9 Sch40 A234 Wpb Butt Weld Pipe Fitting Carbon Steel Elbow
Product quality: In line with the export and national execution products high pressure pipe product standards.
For: Pharmaceuticals, dairy products, petroleum, beer, beverages, chemicals, water conservancy, electricity and so on.
  The advantages of the production process of carbon steel punching elbow are mainly as follows:
        1, without the need for tube billet as raw material, can save pipe equipment and mold costs, and can be arbitrarily large diameter and relatively thin wall thickness of carbon steel elbow.
  2. The blank is flat or developable surface, so the material is simple, the precision is easy to ensure, assembly and welding is convenient. 3, due to the above two reasons, can shorten the manufacturing cycle, production costs greatly reduced.
  Due to the need for no special equipment, especially suitable for on-site processing of large carbon steel elbow. 4, carbon steel stamping elbow for oil, natural gas, chemical, hydropower, construction and boilers and other industries piping system. Weld a polygon-shaped polygonal ring shell or both ends closed multi-ribbed fan shell, the internal pressure medium, the inner pressure, under the action of the cross section from the polygon gradually into a circle, and eventually become a circular ring shell

ansi b16.9 sch40 a234 wpb butt weld Carbon Steel Elbow

1. Detailed Information as per the following Form:
Type Elbow
Size Seamless elbow:1/2"~24" DN15~DN600
Welded Elbow: 1/2"~100" DN15~DN2500
Wall thickness sch10, sch20, sch30, std, sch40, sch60, xs, sch80, sch100, 
sch120, sch140, sch160, xxs, std,sch5s,sch10s,sch20s,sch40s,sch80s
Standards ANSI B16.9, DIN2506, JIS, BS,GOST  
Material Carbon steel: ASTM/ASME A234 WPB,WPC,ST37,ST54
Alloy steel: ASTM/ASME A234 WP9-WP12-WP11-WP22-WP5-WP91
Stainless steel: ASTM/ASME A403 WP 304-304L, WP 316-316L,WP 321,201
Low-temperature steel: ASTM/ASME A402 WPL 3-WPL 6
High performance: ASTM/ASME A860 WPHY 42-46-52-60-65-70
Surface treatment Transparent oil, rust-proof black oil or hot galvanized
Packing wooden case, pallet or as customers' requirement
Applications Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc
Min order 10 piece
Delivery time 7days after receipt of advanced payment
Certification ASME, ISO9001:2000
Delivery Term FOB(30% down payment in advance, the balance before shipment)
CIF or C&F(30% in advance , the balance against with the copy of B/L)

ANSI B16.9 Sch40 A234 Wpb Butt Weld Pipe Fitting Carbon Steel Elbow
ANSI B16.9 Sch40 A234 Wpb Butt Weld Pipe Fitting Carbon Steel Elbow
ANSI B16.9 Sch40 A234 Wpb Butt Weld Pipe Fitting Carbon Steel Elbow


上一篇:Carbon Steel Welding elbow cost

下一篇:johnson wire filter pipe,ewr Slotted Pipe,Slot Liner Pipe