The type of pipe fitting--hebei cangzhou Pipe Fitting Manufacture Co,.LTD

The type of pipe

Pipe fitting many different types, summarized the following main types:

A. Variable diameter pipe refers to pipe a certain part of the client or pipe diameter is reduced;

 

Two. Variable wall thickness of pipe, so that the wall thickness changes along the length direction of the tube;

3. Change the section of pipe fitting, upon request, of circular cross section into a square, oval, polygon, etc.;

4. Bent tube, we have contacted more, is the straight tube into a different radius of curvature of the bend, such as elbow, bend, cast iron pipes, etc.;

5 With flange and the round edge of the pipe, the former refers to the pipe end to the inside or outside the scoliosis, which refers to the formation of a bulge or fluted tube in the pipe circumferential direction;

6. With crimping and back pipe, increasing the total strength of the pipe end to the outside or the inside of the tube crimping or tube end to seal pipe;

7. Expanded diameter tube, in accordance with the requirements of the pipe end, or a part of expansion of the formation of pipe fittings of various shapes;

Pipe fitting many different types, summarized the following main types:

A. Variable diameter pipe refers to pipe a certain part of the client or pipe diameter is reduced;

Two. Variable wall thickness of pipe, so that the wall thickness changes along the length direction of the tube;

3. Change the section of pipe fitting, upon request, of circular cross section into a square, oval, polygon, etc.;

4. Bent tube, we have contacted more, is the straight tube into a different radius of curvature of the bend, such as elbow, bend, cast iron pipes, etc.;

5 With flange and the round edge of the pipe, the former refers to the pipe end to the inside or outside the scoliosis, which refers to the formation of a bulge or fluted tube in the pipe circumferential direction;

6. With crimping and back pipe, increasing the total strength of the pipe end to the outside or the inside of the tube crimping or tube end to seal pipe;

7. Expanded diameter tube, in accordance with the requirements of the pipe end, or a part of expansion of the formation of pipe fittings of various shapes;